Configuring QuickMeet.Chat with Kubernetes

Print
Dark
Light
PDF

Article summary

Did you find this summary helpful?

Thank you for your feedback

The QuickMeet.Chat Helm chart provides various options for configuring your deployment. You can:

Define your configuration options using a values.yaml file, as demonstrated in the deployment guide. This method is the recommended approach.

Pass configuration parameters directly to the helm commands using the --set key=value syntax. For example,

helm install rocketchat rocketchat/rocketchat --set mongodb.auth.passwords={$(echo -n $(openssl rand -base64 32))},mongodb.auth.rootPassword=$(echo -n $(openssl rand -base64 32))

The following table lists the configurable parameters of the QuickMeet.Chat chart and their default values.

Parameter	Description	Default
`image.repository`	Image repository	`registry.quickmeet.chat/rocketchat/quickmeet.chat`
`image.tag`	Image tag	`3.18.3`
`image.pullPolicy`	Image pull policy	`IfNotPresent`
`host`	Hostname for QuickMeet.Chat. Also used for ingress (if enabled)	`""`
`replicaCount`	Number of replicas to run	`1`
`smtp.enabled`	Enable SMTP for sending mails	`false`
`smtp.existingSecret`	Use existing secret for SMTP account	`""`
`smtp.username`	Username of the SMTP account	`""`
`smtp.password`	Password of the SMTP account	`""`
`smtp.host`	Hostname of the SMTP server	`""`
`smtp.port`	Port of the SMTP server	`587`
`extraEnv`	Extra environment variables for QuickMeet.Chat. Used with `tpl` function, so this needs to be a string	`""`
`extraVolumes`	Extra volumes allowing inclusion of certificates or any sort of file that might be required (see bellow)	`[]`
`extraVolumeMounts`	Where the aforementioned extra volumes should be mounted inside the container	`[]`
`podAntiAffinity`	Pod anti-affinity can prevent the scheduler from placing QuickMeet.Chat replicas on the same node. The default value "soft" means that the scheduler should prefer to not schedule two replica pods onto the same node but no guarantee is provided. The value "hard" means that the scheduler is required to not schedule two replica pods onto the same node. The value "" will disable pod anti-affinity so that no anti-affinity rules will be configured.	`""`
`podAntiAffinityTopologyKey`	If anti-affinity is enabled sets the topologyKey to use for anti-affinity. This can be changed to, for example `failure-domain.beta.kubernetes.io/zone`	`kubernetes.io/hostname`
`affinity`	Assign custom affinity rules to the QuickMeet.Chat instance https://kubernetes.io/docs/concepts/configuration/assign-pod-node/	`{}`
`minAvailable`	Minimum number / percentage of pods that should remain scheduled	`1`
`existingMongodbSecret`	An already existing secret containing MongoDB Connection URL	`""`
`externalMongodbUrl`	MongoDB URL if using an externally provisioned MongoDB	`""`
`externalMongodbOplogUrl`	MongoDB OpLog URL if using an externally provisioned MongoDB. Required if `externalMongodbUrl` is set	`""`
`mongodb.enabled`	Enable or disable MongoDB dependency. Refer to the stable/mongodb docs for more information	`true`
`persistence.enabled`	Enable persistence using a PVC. This is not necessary if you're using the default GridFS file storage	`false`
`persistence.storageClass`	Storage class of the PVC to use	`""`
`persistence.accessMode`	Access mode of the PVC	`ReadWriteOnce`
`persistence.size`	Size of the PVC	`8Gi`
`persistence.existingClaim`	An existing PVC name for rocketchat volume	`""`
`resources`	Pod resource requests and limits	`{}`
`securityContext.enabled`	Enable security context for the pod	`true`
`securityContext.runAsUser`	User to run the pod as	`999`
`securityContext.fsGroup`	fs group to use for the pod	`999`
`serviceAccount.create`	Specifies whether a ServiceAccount should be created	`true`
`serviceAccount.name`	Name of the ServiceAccount to use. If not set and create is true, a name is generated using the fullname template	`""`
`ingress.enabled`	If `true`, an ingress is created	`false`
`ingress.pathType`	Sets the value for pathType for the created Ingress resource	`Prefix`
`ingress.annotations`	Annotations for the ingress	`{}`
`ingress.path`	Path of the ingress	`/`
`ingress.tls`	A list of IngressTLS items	`[]`
`license`	Contents of the license file, if applicable	`""`
`prometheusScraping.enabled`	Turn on and off /metrics endpoint for Prometheus scraping	`false`
`prometheusScraping.port`	Port to use for the metrics for Prometheus to scrap on	`9458`
`serviceMonitor.enabled`	Create ServiceMonitor resource(s) for scraping metrics using PrometheusOperator (prometheusScraping should be enabled)	`false`
`serviceMonitor.interval`	The interval at which metrics should be scraped	`30s`
`serviceMonitor.port`	The port name at which container exposes Prometheus metrics	`metrics`
`livenessProbe.enabled`	Turn on and off liveness probe	`true`
`livenessProbe.initialDelaySeconds`	Delay before liveness probe is initiated	`60`
`livenessProbe.periodSeconds`	How often to perform the probe	`15`
`livenessProbe.timeoutSeconds`	When the probe times out	`5`
`livenessProbe.failureThreshold`	Minimum consecutive failures for the probe	`3`
`livenessProbe.successThreshold`	Minimum consecutive successes for the probe	`1`
`microservices.enabled`	Use microservices architecture	`false`
`microservices.presence.replicas`	Number of replicas to run for the given service	`1`
`microservices.ddpStreamer.replicas`	Idem	`1`
`microservices.streamHub.replicas`	Idem	`1`
`microservices.accounts.replicas`	Idem	`1`
`microservices.authorization.replicas`	Idem	`1`
`microservices.nats.replicas`	Idem	`1`
`readinessProbe.enabled`	Turn on and off readiness probe	`true`
`readinessProbe.initialDelaySeconds`	Delay before readiness probe is initiated	`10`
`readinessProbe.periodSeconds`	How often to perform the probe	`15`
`readinessProbe.timeoutSeconds`	When the probe times out	`5`
`readinessProbe.failureThreshold`	Minimum consecutive failures for the probe	`3`
`readinessProbe.successThreshold`	Minimum consecutive successes for the probe	`1`
`registrationToken`	Registration token for QuickMeet.Chat Cloud	""
`service.annotations`	Annotations for the QuickMeet.Chat service	`{}`
`service.labels`	Additional labels for the QuickMeet.Chat service	`{}`
`service.type`	The service type to use	`ClusterIP`
`service.port`	The service port	`80`
`service.nodePort`	The node port used if the service is of type `NodePort`	`""`
`podDisruptionBudget.enabled`	Enable or disable PDB for RC deployment	`true`
`podLabels`	Additional pod labels for the QuickMeet.Chat pods	`{}`
`podAnnotations`	Additional pod annotations for the QuickMeet.Chat pods	`{}`

You can also refer to the GitHub repository to explore all the available configuration options.

Database setup

QuickMeet.Chat uses a MongoDB instance to persist its data. By default, the MongoDB chart is deployed and a single MongoDB instance is created as the primary in a replicaset. For additional configuration options, refer to the MongoDB chart documentation.

If you are using the default chart settings, ensure you set the mongodb.auth.rootPassword and mongodb.auth.passwords values. The root credentials are used to connect to the MongoDB OpLog.

Using an external database

This chart supports using an existing MongoDB instance. To disable the chart's MongoDB deployment, set the configuration option mongodb.enabled=false.

Configuring additional environment variables

You can add extra environment variables to your QuickMeet.Chat deployment. For example:

extraEnv: |
  - name: MONGO_OPTIONS
    value: '{"ssl": "true"}'

Specifying additional volumes

Sometimes, it's necessary to include extra sets of files by exposing them to the container as a mount point. The most common use case is the inclusion of SSL CA certificates.

extraVolumes: 
  - name: etc-certs
    hostPath:
    - path: /etc/ssl/certs
      type: Directory
extraVolumeMounts: 
  - mountPath: /etc/ssl/certs
    name: etc-certs   
    readOnly: true

Increasing server capacity and HA setup

To increase the server's capacity, you can increase the number of QuickMeet.Chat server instances across available computing resources in your cluster. For example,

kubectl scale --replicas=3 deployment/rocketchat

By default, the chart creates one MongoDB instance as a Primary in a replicaset. You can also scale up the capacity and availability of the MongoDB cluster independently.

See MongoDB chart for configuration information. To learn more on running QuickMeet.Chat in scaled configurations, visit the configure MongoDB replicaset guide.

Manage MongoDB secrets

The chart provides several ways to manage the connection for MongoDB apart from the primary mongodb.auth values. They include:

Values passed to the chart (externalMongodbUrl, externalMongodbOplogUrl)
An ExistingMongodbSecret containing the MongoURL and MongoOplogURL

apiVersion: v1
kind: Secret
metadata:
  name: my-secret
type: Opaque
data:
  mongo-uri: mongodb://user:password@localhost:27017/rocketchat
  mongo-oplog-uri: mongodb://user:password@localhost:27017/local?replicaSet=rs0&authSource=admin

Upgrading

As a warning, this chart will not handle MongoDB upgrades and will depend on the user to ensure the supprted version is runnning.

The upgrade will fail if any of the following requirements are not met :

Must not skip a MongoDB release. For example, 4.2.x to 5.0.x will fail.
Current featureCompatibilityVersion must be compatible with the version the user is trying to upgrade to. For example—if the current database version and feature compatibility is 4.4 and 4.2, respectively, but the user is trying to upgrade to 5.0, it'll fail.

The chart will not check if the mongodb version is supported by the QuickMeet.Chat version considering deployments that might occur in an airgapped environment. You can check the release notes to confirm that.

To get the currently deployed MongoDB version, the easiest method is to get into the mongo shell and run db.version(). You are advised to pin your MongoDB dependency in the values file.

mongodb:
  image:
    tag: # find from https://hub.docker.com/r/bitnami/mongodb/tags

To learn more about the QuickMeet.Chat helm chart, visit the GitHub repository.

References

Was this article helpful?

What's Next

Deploy with Snaps

On this page

Database setup